Location: Home >>
Gas Detector series of SCOTT >> Fixed
Controllers
SCOTT offer gas detection controllers ranging from
single up to sixteen channels on wall mounting controllers.
These provide the user with accurate feedback information
regarding gas concentrations and alarm status. Integral
relay alarm contacts can activate external audible/visual
alarm units.
Analogue signal output of 4 - 20 mA available on most
units to interface to plant control systems. Larger
systems are available in rack mounting configurations
with digital serial outputs.
For safe area installation only - optional enclosures
available for hazardous area installations for some
models
Sentinel 16 7800 Multichannel
Controller
A versatile controller which provides simultaneous
display and alarm functions for up to 16 channels
of gas detection. Available in 19" rack format
scaleable for over 16 channels.
Key Features
- Eight or Sixteen channel controller – IP
56 protection
- Standard input Modbus RS-485
- Optional inputs: 4-20mA, direct cat bead
for flamm
- Graphical channel display/trend indication
- 3 common, 5A alarm relays: low, high, fault
- Optional plug in, configurable, 8x alarm
relay boards
- Configurable alarm relay logic: voting or
zoning
- Output RS-485 or optional analogue 4-20mA
- Optional integral local 90db audible alarm
- Selectable power supply 110VAC , 230VAC,
or 24VDC
Standards
- CE marked to EN50014, EN50018 and EN50020
- UL approved for general electrical supply
More
>>>
|
|
| |
Sentinel II 7200 Area Monitor
A one or two channel controller for toxic, oxygen
deficiency and/or combustible gas monitoring.
Key Features
- One or two channel controller - protection
to IP56
- Suitable for oxygen, toxic and flammable
detectors
- Output options of 4-20mA analogue or digital
serial
- Alarm relays: 2 x gas level per channel and
1 x common fault. Rated 5A
- Integral or remote detectors
- Integral local 85db audible alarm
- Universal power supply 110VAC – 230VAC
- Sensor self test options available for many
toxic gas sensors
- Optional battery back up
Standards
- CE marked to EN50014, EN50018 and EN50020
- Sensors with UL, CSA i.s. approvals, ATEX
pending
More
>>>
|
QuadScan II Series 7400 Four
Channel Receiver
The new Series 7400 QUAD-SCAN II is a scaleable
1 to 4 channel wall mount receiver/controller
for 4-20mA transmitters - gas and flame detectors.
Key Features
- One to four channel controller - protection
to IP56
- Suitable for any 4-20mA detector (oxy, toxi.
flamm)
- Continuous display of all four channels
- 3 common, 5A alarm relays: low, high, fault
- Optional, configurable 8x alarm relay module
in separate enclosure
- Configurable alarm relay logic: voting or
zoning
- Analogue 4-20mA outputs standard
- Integral local 85db audible alarm
- Universal power supply 110VAC – 230VAC, plus
24VDC
- Optional battery back up
Standards
- CE marked to EN50014, EN50018 and EN50020
- CSA approved general electrical saftey
More
>>>
|
|
 |
Sentinel VI 7600 6 channel Controller
A versatile six channel controller with full
analog and digital I/O capability. A comprehensive
interface and flexible alarm and relay configuration
make Sentinel VI an ideal choice for monitoring
up to six individual points of gas detection.
Key Features
- Six channel controller – IP56 protection
- Standard input Modbus RS-485
- Optional inputs: 4-20mA, direct cat bead
for flamm
- Scrolling channel display
- 3 common, 5A alarm relays: low, high, fault
- Optional plug in, configurable, 6x alarms
relay boards
- Configurable alarm relay logic: voting or
zoning
- Output RS-485 or optional analogue 4-20mA
- Integral local 90db audible alarm
- Selectable power supply 110VAC , 230VAC,
or 24VDC
Standards
- CE marked to EN50014, EN50018 and EN50020
- UL approved for general electrical supply
|
|
