| VISORS |
| Application 1 |
Application 2 |
Material |
Code |
Details |
Visor Holders |
High impact
|
Heat resistant
Softening point
between 90¨C105ˇăC |
Polycarbonate
1mm |
V8F508
V8F508G
V9F518CG |
Clear
Green Shade 5*
Clear with chinguard |
F408BG, FXVH400/P |
| Chemical |
V8F516 |
Clear |
F600CGB |
| FHP200 |
Clear |
KF001/KF010 |
| FCP200 |
Clear |
| High heat |
Gold Plated Polycarb. |
V9GOLDCG |
Clear |
FCH417,FVH450 |
| Medium
Impact |
Chemical |
Polycarbonate
0.76mm |
F203 |
Clear |
Visor combination
browguard |
V8F308
V71
|
Clear or smoke
Clear |
F408BG,FXVH400/P |
Heat resistant Softening
point
between 90¨C125ˇăC.
Delamination warns of overheating |
Thermoguard |
V9F418CG
V71T
V8F408 |
Clear with chinguard
Clear
Clear |
|
| V8F416 |
Clear |
F600CGB |
·ŔThermoguard
visors are available in green shades and/or with
chinguards fitted.
High heat visor holders and Type 2 hardhats recommended
for hot work. |
| Forestry |
|
Mesh |
V71M |
Not AS approved |
F408BG,FXVH400/P |
| |
FCMY |
|
KF001/KF010 |
| Stainless Steel Mesh |
FCMSS |
Approved to European
Standards EN1731 |
| Nylon Mesh |
FHMY |
|
|
| Splash resistance:
Polycarbonate is very resistant to water based liquids
such as acids and some weak solvents, but with some
chemicals may need replacing regularly due to iscolouration.
Select 0.76mm or 1.0mm Polycarbonate based on impact
requirements. For other chemicals, Thermoguard may
be preferable. Softening temperature are an approximate
guide only. * Not AS approved ( light transmission). |
